How To Install Fixpack In Lotus Domino

Posted on

Installation of Kaspersky Anti-Virus 8.0 for Lotus Domino via a web browser: Copy the KAVInstaller.nsf database in the Domino data folder. Sign the database with the server user account (the server needs permissions to start agents, use limited/unlimited LS methods, create replicas and database copies). Install Instructions: 1. Exit the Notes client. Create a backup copy of the above two binary files, which can be found in the Notes Program directory (default directory is /opt/ibm/lotus/notes/). Copy the new binary files from the hotfix to the Notes Program directory (default directory is /opt/ibm/lotus/notes/).

Active4 years ago
  1. Installing a Fixpack and Interim Fix for Domino and Quickr Installs. Installing Fix Pack 3 Once Domino 8.5.1 has been installed, the next step is to install the Fix Pack. Day 1 - Lotus Lurkers are Good January (21) 2010 (141) December (13) November (8) October (13).
  2. IBM released Domino 9.0.1 Fixpack 3 Domino 9.0.1 Fixpack 3 today. As always I went into the problem when trying to install it. It said that my version is not the one expected which was caused by the prior installed Interim Hotfix 384.

When I install notes 9 on my Ubuntu 13. 04 its not complete the installation because some depending package see below:

Braiam
54.1k21 gold badges144 silver badges229 bronze badges
HassanHassan

5 Answers

My experience with IBM Notes 9 and 9.0.1 is that installing all required dependencies will break X and render your 64-bit Ubuntu installation unusable for the most part.

The reason is that the deb package as distributed by IBM is designed to be installed on 32-bit systems only.

However, you can fix the package dependencies to make it install properly and work flawlessly on your 64-bit Ubuntu. This is similar to miquel's approach above, only that he removes all dependencies, while I'll modify them to be compatible with both 32-bit and 64-bit Ubuntu versions.

Dependencies are mostly libraries the program is dynamically liked to, so I ran this command on an 32-bit Ubuntu 12.04 with IBM Notes installed:

This was the output:

Then I untar'd IBM Notes:

extracted the package's contents:

and edited the deb package's control file:

to replace the default dependencies with the list above (plus some additions). This is the modified control file:

Comments on the control file above:

The Pre-Depends section contains the package list generated on 12.04 with specific architecture information that makes it compatible with 32-bit and 64-bit versions.

I also noticed that Precise's libtasn1-3 had been updated to libtasn1-6 on 14.04, so I added all version numbers between 1-3 and 1-6 to the control file. Some trial and error showed that other software was needed, like libcanberra,libp11 and so on, which I included. I also left dependencies to gdb, coreutils, etc, but accepting both architectures.

I copied the modified DEBIAN folder to common:

recreated the package:

installed dependencies:

and installed IBM Notes:

Note that you will have to start Notes several times while setting it up. I even had to kill it once as it hung while connecting to the Domino server, but it runs without a hitch on my Trusty Tahr (14.04) installation.

Community♦
jaumejaume

You required the dependent files first.

Use

Then try installing using

sudo dpkg –force-depends -i ibm-notes-9.0.i586.deb

Source & More information available here.

Web-EWeb-E
18.3k11 gold badges45 silver badges90 bronze badges

I had problems also installing Lotus Notes 9 on ubuntu. Try this if you're on 64 bits (based on usable software's blog solution). You'll have to unpack the deb file, remove the dependencies and install it again. There's no need to --force-depends if you do it this way:

miquelmiquel

I would comment if I could. but here's what you need to do:

  1. Continue to try and install with dpkg
  2. Each time you get an error, you need to read the error for the package missing
  3. Install the missing package using sudo apt-get install $PACKAGE_NAME. NOTE: You can put multiple package names in this command
  4. Repeat steps until package installs.

Unfortunately, dpkg does not have a package manager within, but is just the barebones package installer that applications like apt use to do the install work.

It looks like the alternative, which may be better, is to use gdebi-gtk to install your package. It will resolve your dependency problems. I've never used it, so might as well try it and let us know if it works. It should be faster than doing it by hand.

Nava2Nava2

Add this software source to /etc/apt/sources.list

Run this command for installing dependencies:

Run command:

Install other .debs in the following way:

karel
67.3k14 gold badges150 silver badges170 bronze badges
user436592user436592

Not the answer you're looking for? Browse other questions tagged dpkgsoftware-installationibm-lotus-notes or ask your own question.

This chapter describes how to install and configure Lotus Domino 11g Release 2 WebGate for Oracle Access Manager.

This chapter contains the following sections:

6.1 Installation Overview of Lotus Domino 11g WebGate

Installing Lotus Domino 11g WebGate for Oracle Access Manager involves the following steps:

  1. Installing the Lotus Domino web server

  2. Installing Lotus Domino 11g WebGate for Oracle Access Manager

  3. Completing the post-installation configuration steps

  4. Verifying the Lotus Domino 11g WebGate installation

  5. Registering the new WebGate agent

6.2 Prerequisites for Installing Lotus Domino 11g WebGate

This section contains the following topics:

6.2.1 Oracle Fusion Middleware Certification

The Oracle Fusion Middleware Supported System Configurations document provides certification information for Oracle Fusion Middleware, including supported installation types, platforms, operating systems, databases, JDKs, and third-party products related to Oracle Identity and Access Management 11g Release 2 (11.1.2.1.0).

You can access the Oracle Fusion Middleware Supported System Configurations document by searching the Oracle Technology Network (OTN) web site:

6.2.2 Installing JRE

You must have Java runtime environment (JRE) 1.7 or higher installed.

6.2.3 Installing and Configuring Lotus Domino 11g Web Server

You can download the Installer from the Oracle Technology Network (OTN):

Alternatively, you can download the latest Oracle Fusion Middleware 11g software from the following website:

For information about installing and configuring Oracle HTTP Server 11g (11.1.1.7.0), see Oracle Fusion Middleware Installation Guide for Oracle Web Tier.

6.2.4 Installing and Configuring Oracle Access Manager 11g

For information about installing Oracle Access Manager (OAM), see 'Installing and Configuring Oracle Identity and Access Management (11.1.2.2.0)' in Oracle Fusion Middleware Installation Guide for Oracle Identity and Access Management.

For information about configuring Oracle Access Manager in a new or existing WebLogic administration domain, see 'Configuring Oracle Access Manager' in Oracle Fusion Middleware Installation Guide for Oracle Identity and Access Management.

In addition, see 'Securing Communication' in Oracle Fusion Middleware Administrator's Guide for Oracle Access Manager for information about configuring Oracle Access Manager in Open, Simple, or Cert mode.

6.3 Installing Lotus Domino 11g WebGate

This section discusses the following topics:

6.3.1 Obtaining the Software

For information about obtaining the Lotus Domino 11.1.2.2.0 WebGate software, see Oracle Fusion Middleware Download, Installation, and Configuration ReadMe.

6.3.2 Starting the Lotus Domino 11g WebGate Installer

To start the installation wizard, perform the following steps:

  1. Go to the directory in which you extracted the contents of the Installer.

  2. Go to the following location:

    cd Disk1

  3. Run the following command:

    On Windows:

    setup.exe -jreLoc <location_of_jre>

  4. Provide the jre location when the Oracle Universal Installer (OUI) prompts for it.

After the Installer starts, the Welcome screen is displayed. Proceed with the installation by referring to Section 6.3.3.

6.3.3 Installation Flow and Procedure of Lotus Domino 11g WebGate

To install Lotus Domino 11g WebGate for Oracle Access Manager, follow the instructions in Table 6-1.

If you need additional help with any of the installation screens, then click Help to access the online help.

Table 6-1 Installation Flow

No.ScreenDescription and Action Required

1.

Welcome Screen

Click Next to continue.

2.

Prerequisite Checks Screen

Click Next to continue.

3.

Specify Installation Location Screen

Specify the Oracle home location.

For more information about these directories, see 'Understanding Oracle Fusion Middleware Concepts and Directory Structure' in Oracle Fusion Middleware Installation Planning Guide for Oracle Identity and Access Management.

Click Next to continue.

4.

Installation Summary Screen

Verify the information on this screen.

Click Install to begin the installation.

5.

Installation Progress Screen

Click Next to continue.

6.

Installation Complete Screen

Click Finish to dismiss the installer.


6.4 Post-Installation Steps for Lotus Domino 11g WebGate

You must complete the following steps after installing Oracle HTTP Server 11g WebGate for Oracle Access Manager:

    1. Move to the following directory under your Oracle home for WebGate:

      WebGate_Homewebgatedomino85toolsdeployWebGate

    2. Run the following command to copy the required bits of agent from the WebGate_Home directory to the WebGate_Instance location:

      /deployWebGateInstance -w <WebGate Instancedir> -oh <WebGate Oracle Home> -ws <Web Server>

      where <Web Server> value is domino in case of domino9 Server

      <Web Server> value is domino85 in case of domino8.5.X Server.

    3. Run the configureDominoWebGate.bat tool for updating Domino Webserver configuration. This will update the Domino notes.ini file with WebGate specific configuration.

      ConfigureDominoWebGate -w <WebGate Instancedir> -oh <WebGate Oracle Home> -ws <Web Server> -notes <path to notes.ini>

      • WebGate_Instance_Dir is the directory in which the new WebGate instances are created.

      • WebGate_Oracle_Home is the full path to the WebGate Oracle home.

      • Path to notes.ini is the full path of the notes.ini configuration file of Domino8.x/9.x server.

    4. Register the WebGate.dll as DSAPI filter from Domino console.

      • Go to Domino Admin console and select Internet Protocols and configure the complete path to webgate.dll in DSAPI filters.

      • Restart the WebServer to enforce the new changes.

6.4.1 Setting the Environment Variable

Set the environment variable LD_LIBRARY_PATH, to WebGate_Oracle_Home/lib.

Example:

export LD_LIBRARY_PATH=/home/Oracle_OAMWebGate1/lib

On Windows, we do not set LD_LIBRARY_PATH, instead update the path variable:

set PATH=<Oracle_OAMWebGate1/webgate/domino/lib>;%PATH%

i.e., Add a semicolon (;) followed by this path at the end of the entry for the path environment variable.

6.5 Verifying the Installation and Configuration of Lotus Domino 11g WebGate

After installing Lotus Domino 11g WebGate for Oracle Access Manager and completing the post-installation steps, you can examine the installDATE-TIME_STAMP.out log file to verify the installation. The default location of the log are as follows:

WebGate_Home/oraInst.loc

6.6 Getting Started with a New Lotus Domino 11g WebGate

Before you can use the new Lotus Domino 11g WebGate agent for Oracle Access Manager, you must complete the following tasks:

6.6.1 Registering the New Lotus Domino 11g WebGate

You can register the new WebGate agent with Oracle Access Manager by using the Oracle Access Manager Administration console. For more information, see 'Registering an OAM Agent Using the Console' in Oracle Fusion Middleware Administrator's Guide for Oracle Access Management.

Alternatively, you can use the RREG command-line tool to register a new WebGate agent. You can use the tool to run in two modes: In-Band and Out-Of-Band.

This section contains the following topics:

6.6.1.1 Setting Up the RREG Tool

To set up the RREG tool, complete the following steps:

    1. After installing and configuring Oracle Access Manager, go to the following location:

      Oracle_IDM2oamserverrregclient

    2. Extract the contents of the RREG.tar.zip file to a destination of your choice.

The tool for registering the agent is located at:

RREG_Homebinoamreg.bat

Note:

RREG_Home is the directory in which you extracted the contents of RREG.tar.gz/rreg.

Set the following environment variables in the oamreg.bat script:

  • OAM_REG_HOME

    Set this variable to the absolute path to the directory in which you extracted the contents of RREG.tar/rreg.

  • JDK_HOME

    Set this variable to the absolute path to the directory in which Java or JDK is installed on your machine.

6.6.1.2 Updating the OAM11gRequest.xml File

You must update the agent parameters, such as agentName, in the OAM11GRequest.xml file in the RREG_Homeinput directory.

Note:

The OAM11GRequest.xml file or the short version OAM11GRequest_short.xml is used as a template. You can copy this template file and use it.

Modify the following required parameters in the OAM11GRequest.xml file or in the OAM11GRequest_short.xml file:

Db2 Install Fixpack

  • serverAddress

    Specify the host and the port of the OAM Administration Server.

  • agentName

    Specify any custom name for the agent.

  • agentBaseUrl

    Specify the host and the port of the machine on which Lotus Domino 11g WebGate is installed.

  • preferredHost

    Specify the host and the port of the machine on which Lotus Domino 11g WebGate is installed.

  • security

    Specify the security mode, such as open, based on the WebGate installed.

  • primaryServerList

    Specify the host and the port of Managed Server for the Oracle Access Manager proxy, under a Server container element.

After modifying the file, save and close it.

Note:

You need to add <Webgate Oracle Home>webgatedominoXXlib folder in Path variable in case of Windows Operating system.

6.6.1.3 Using the In-Band Mode

If you run the RREG tool once after updating the WebGate parameters in the OAM11GRequest.xml file, then the files and artifacts required by WebGate are generated in the following directory:

RREG_Homeoutputagent_name

Note:

You can run RREG either on a client machine or on the server. If you are running it on the server, then you must manually copy the artifacts back to the client.

Complete the following steps:

  1. Open the OAM11GRequest.xml file, which is in the input directory at RREG_Homeinput. RREG_Home is the directory on where you extracted the contents of RREG.tar.gz/rreg.

    Edit the XML file and specify parameters for the new Lotus Domino Server WebGate for Oracle Access Manager.

  2. Run the following command:

    RREG_Homebinoamreg.bat inband inputOAM11GRequest.xml

6.6.1.4 Using the Out-Of-Band Mode

If you are an end user with no access to the server, then you can email your updated OAM11GRequest.xml file to the system administrator, who can run RREG in the out-of-band mode. You can collect the generated AgentID_Response.xml file from the system administrator and run RREG on this file to obtain the WebGate files and artifacts you require.

After you receive the generated AgentID_Response.xml file from the administrator, you must manually copy the file to the input directory on your machine.

  • Complete the following steps:

    1. If you are an end user with no access to the server, then open the OAM11GRequest.xml file, which is in RREG_Homeinput directory.

      RREG_Home is the directory in which you extracted the contents of RREG.tar.gz/rreg. Edit this XML file, specify parameters for the new Lotus Domino WebGate for Oracle Access Manager, and send the updated file to your system administrator.

    2. If you are an administrator, copy the updated OAM11GRequest.xml file, which is in RREG_Homeinput. This is the file you received from the end user. Go to your (administrator's) RREG_Home directory and run the following command:

      RREG_Homebinoamreg.bat outofband inputOAM11GRequest.xml

      An Agent_ID_Response.xml file is generated on the administrator's machine in the RREG_Homeoutput directory. Send this file to the end user who sent you the updated OAM11GRequest.xml file.

    3. If you are an end user, copy the generated Agent_ID_Response.xml file, which is in RREG_Homeinput. This is the file you received from the administrator. Go to your (client's) RREG home directory and run the following command:

      RREG_Homebinoamreg.bat outofband inputAgent_ID_Response.xml

    Note:

    If you register the WebGate agent by using the Oracle Access Manager Administration Console, as described in 'Registering an OAM Agent Using the Console' in the Oracle Fusion Middleware Administrator's Guide for Oracle Access Manager, then you must manually copy the files and artifacts generated after the registration from the server (the machine on which the Oracle Access Manager Administration Console is running) to the client machine. The files and artifacts are generated in the MW_HOME/user_projects/domains/name_of_the_WebLogic_domain_for_OAM/output/Agent_ID directory.

6.6.1.5 Files and Artifacts Generated by RREG

Regardless of the method or mode you use to register the new WebGate agent, the following files and artifacts are generated in the RREG_Home/output/Agent_ID directory:

  • cwallet.sso

  • ObAccessClient.xml

  • In SIMPLE mode, RREG generates:

    • password.xml, which contains the obfuscated global passphrase to encrypt the private key used in SSL. This passphrase can be the same as the passphrase used on the server.

    • aaa_key.pem

    • aaa_cert.pem

  • In CERT mode, RREG generates password.xml, which contains the obfuscated global passphrase to encrypt the private key used in SSL. This passphrase can be different than the passphrase used on the server.

    Note:

    You can use these files generated by RREG to generate a certificate request and get it signed by a third-party Certification Authority. To install an existing certificate, you must use the existing aaa_cert.pem and aaa_chain.pem files along with password.xml and aaa_key.pem.

How To Install Fixpack In Lotus Domino S

6.6.2 Copying Generated Files and Artifacts to the Oracle HTTP Server WebGate Instance Location

After RREG generates these files and artifacts, you must manually copy them, based on the security mode you are using, from the RREG_Home/output/Agent_ID directory to the WebGate_Instance_Home directory.

Do the following according to the security mode you are using:

  • In OPEN mode, copy the following files from the RREG_Home/output/Agent_ID directory to the WebGate_Instance_Home/webgate/config directory:

    • ObAccessClient.xml

    • cwallet.sso

  • In SIMPLE mode, copy the following files from the RREG_Home/output/Agent_ID directory to the WebGate_Instance_Home/webgate/config directory:

    • ObAccessClient.xml

    • cwallet.sso

    • password.xml

    In addition, copy the following files from the RREG_Home/output/Agent_ID directory to the WebGate_Instance_Home/webgate/config/simple directory:

    • aaa_key.pem

    • aaa_cert.pem

  • In CERT mode, copy the following files from the RREG_Home/output/Agent_ID directory to the WebGate_Instance_Home/webgate/config directory:

    • ObAccessClient.xml

    • cwallet.sso

    • password.xml

Generating a New Certificate

From the openssl or any other tool you can generate a new certificate.

Copy the following generated certificates to the WebGate_Instance_Home/webgate/config directory:

  • aaa_key.pem

  • aaa_cert.pem

  • cacert.pem located in the simpleCA directory

    Note:

    After copying the cacert.pem file, you must rename the file to aaa_chain.pem.

Migrating an Existing Certificate

If you want to migrate an existing certificate (aaa_key.pem, aaa_cert.pem, and aaa_chain.pem), ensure that you use the same passphrase that you used to encrypt aaa_key.pem. You must enter the same passphrase during the RREG registration process. If you do not use the same passphrase, then the password.xml file generated by RREG will not match the passphrase used to encrypt the key.

If you enter the same passphrase, you can copy these certificates as follows:

Premiere CS6 ini hanya bisa di instal pada windows 64bit sedangkan untuk 34bit saya tidak tahu menggunakan versi yang mana, untuk lebih jelas nya kalian bisa tanya ke mbah. Down adobe premiere pro cs4 full crack.

  1. Go to the WebGate_Instance_Home/webgate/config directory.

  2. Copy the following certificates to the WebGate_Instance_Home/webgate/config directory:

    • aaa_key.pem

    • aaa_cert.pem

    • aaa_chain.pem

6.7 Setting the DCC Directory Mapping

For setting up the Domino WebGate as DCC WebGate, you need to configure the path to WebGate login files in Domino Webserver.

  1. Login to Domino Admin Console.

  2. On the left side pane, expand Web > Web Server Configurations, open the Domino Server.

  3. In the Domino Server configuration, select Create Web > URL Mapping/Redirection.

    • /oamsso-bin -> <WebGateHome>webgatedominooamsso-bin

    • /oamsso -> <WebGateHome>webgatedominooamsso

  4. Permissions to be provided for each mapping from the Domino console:

    • For /oamsso-bin: Execute

    • For /oamsso: Read

6.8 Deinstalling Lotus Domino 11g WebGate

You should always use the instructions provided in this section for removing the Lotus Domino 11.1.2.2.0 WebGates for Oracle Access Manager. If you try to remove the software manually, then you may experience problems when you try to reinstall the software again at a later time. Following the procedures in this section will ensure that the software is properly removed.

Devil may cry 3 and devil may cry 4 also uploaded in our site. Features of DMC 5 PC Game. Following are the main features of Devil May Cry 5 Free Download PC Game that you will be able to experience after the first install on your Operating System. The graphics and visual effects are amazing; It is a action adventurous hack and slash game. Jun 11, 2018  Devil May Cry 5 OST| Ali Edwards - Devil Trigger| Full Song [HQ] -- Devil Trigger PS4 Pre-Order Theme - Devil Trigger PS4. Devil May Cry 5 Free Download Full Version PC Game Devil May Cry 5 PC Game Review True gamers should have known Devil May Cry better than other people because, it is one of the world’s famous action games ever been produced. Devil May Cry 5 Free Download PC game for Windows. It is an action adventure game which focuses on fight of a character with supreme skills. OceanOfGames, Ocean Of Games, OceanGames PC Devil May Cry 5 PC Game Overview DMC 5 PC Game is developed by Ninja Theory and published by Capcom. It is a game based on []. Devil may cry 5 download for pc full version.

To deinstall the WebGate agent, do the following:

  1. Go to the MW_HOMEWebgGate_homeouibin.

  2. Run the following command:

    setup.exe -deinstall -jreLocJRE_LOCATION

    Ensure that you specify the absolute path to your JRE_LOCATION; relative paths are not supported.

After the deinstaller starts, the Welcome screen is displayed. Proceed with the deinstallation by referring to Section 6.8.1.

6.8.1 Deinstallation Screens and Instructions

Follow the instructions in Table 6-2 to complete the deinstallation.

If you need additional help with any of the deinstallation screens, then click Help to access the online help.

Table 6-2 Deinstallation Flow

How To Install Fixpack In Lotus Dominoes

Sl. No.ScreenDescriptionAction Required

1.

Welcome

Each time the deinstaller starts, the Welcome screen is displayed.

Click Next.

2.

Deinstall Oracle Home

The Deinstall Oracle Home screen shows the Oracle home you are about to deinstall.

Verify the Oracle home you are about to deinstall.

Click Deinstall.

On the Warning screen, select whether or not you want the deinstaller to remove the Oracle home directory in addition to removing the software.

Click Yes to have the deinstaller remove the software and Oracle home, No to remove only the software, or Cancel to return to the previous screen.

If you select No, go to Section 6.8.2 for instructions on how to manually remove your Oracle home directory.

3.

Deinstallation progress

The Deinstallation Progress screen shows the progress and status of the deinstallation.

Wait until the Deinstallation Complete screen appears.

4.

Deinstallation Complete

The Deinstallation Complete screen appears when the deinstallation is complete.

Click Finish to dismiss the screen.


6.8.2 Manually Removing the Oracle Home Directory

If you have selected No on the warning screen during deinstallation, then you must manually remove your WebGate_Home directory and any sub-directories. For example: if your Oracle WebGate home directory was /home/Oracle/Middleware/Oracle_OAMWebGate1, run the following command:

cd /home/Oracle/Middleware/

rm -rf Oracle_OAMWebGate1

If your Oracle Common home directory was C:OracleMiddlewareOracle_OAMWebGate1, then use a file manager window, go to the C:OracleMiddleware directory, right-click on the Oracle_OAMWebGate1 folder, and then select Delete.

6.9 Silent Installation for Lotus Domino 11g WebGate

To run the Lotus Domino 11g WebGate in silent mode, complete the following steps:

How To Install Fixpack In Lotus Dominos Pizza

  1. Set the contents of the silent.rsp file. For example:

    In the preceding file, the parameters are as follows:

    • ORACLE_HOME: Provide the Oracle Home location. This is the directory in which you want to install the new Lotus Domino WebGate. The location must be an immediate child folder under the specified Middleware Home location. The Oracle Home directory name can contain only alphanumeric, hyphen (-), dot (.), and underscore (_) characters, and must begin with an alphanumeric character. The total length has to be less than or equal to 128 characters. For example, home/middleware/domino_webgate.

    • MIDDLEWARE_HOME: Specify the full path to your Middleware home directory.

  2. Extract the contents of the installer to a directory.

  3. Run the following command:

    WebGate_Installer_Directory/Disk1/runInstaller -jreLocjre_location-invPtrLocAbsolute_Path_Of_the_oraInst.loc_file-silent -responseAbsolute_Path_Of_the_silent.rsp_file

    In the preceding command:

    • WebGate_Installer_Directory is the absolute path to the directory in which you have extracted the contents of the WebGate installer.

    • jre_location is the absolute path to the JRE directory.

    • Absolute_Path_Of_the_oraInst.loc_file is the absolute path to the oraInst.loc file.

    • Absolute_Path_Of_the_ silent.rsp_file is the absolute path to the silent.rsp file you created.